What Is a Square in Roofing? 100 Sq Ft Explained
Quick Answer & Key Facts
- 1 roofing square = 100 square feet of roof surface (a 10 ft x 10 ft area).
- It measures roof area, not floor or house area.
- Many standard asphalt shingles use about 3 bundles per square. Specialty shingles and wood products vary; use the coverage printed on the selected package.
- Fastener quantity varies: use the shingle count and fastening pattern required for the selected product, roof slope and applicable code.
- Installed cost in Metro Atlanta: roughly $550–$900 per square in 2026 (about $5.50–$9.00 per sq ft).
- Average home roof: 20–30 squares.
A square in roofing is a unit of measurement equal to 100 square feet of roof surface — the same as a 10-foot by 10-foot area. It is the standard way roofers measure a roof, order materials, and price a job, and it describes the roof area itself, not the floor space or square footage of your house. At Dom Roofing & Restoration, a GAF Master Elite contractor based in Sugar Hill, GA, we measure every roof across Gwinnett County and North Atlanta in squares, so this guide explains exactly what that number means for your home and your budget. DOM Roofing & Restoration is also a GAF President’s Club Award Winner.
We wrote this because "square" is the single most confusing word homeowners hit on a roofing quote. Once you understand it, every estimate you read — ours or anyone else's — starts to make sense.
How big is a roofing square?
A roofing square is 100 square feet of roof surface, which you can picture as a 10 ft x 10 ft patch of roof. The key word is roof surface — not the floor space inside your home and not the footprint of the building. Because your roof is angled, its actual surface area is always larger than the ground it covers, so a 2,000-square-foot house almost never has exactly 2,000 square feet of roof. This is why we never estimate from the home's square footage; we measure the roof planes directly. In short, the square is the ruler, and your roof is what gets measured with it.
How many square feet are in a roofing square?
There are exactly 100 square feet in one roofing square. To convert between the two, the math is simple:
- Square feet to squares: divide total roof area by 100. (2,400 sq ft ÷ 100 = 24 squares.)
- Squares to square feet: multiply squares by 100. (18 squares × 100 = 1,800 sq ft.)
This is why you'll sometimes see roofing cost quoted "per square" and sometimes "per square foot" — they're the same job, just divided differently. That simple division is the foundation of every roofing estimate, which is why getting the roof measurement right matters more than any other number on your quote.
How many bundles are in a roofing square?
Many standard asphalt shingles are packaged at roughly three bundles per roofing square, but coverage varies by product. Check the current wrapper and installation instructions for the exact shingles you order, including GAF Timberline HDZ. Nominal packaging and installed coverage are not always identical.
| Roofing Material | Bundles per Square | Coverage per Bundle |
|---|---|---|
| Architectural / dimensional asphalt shingles | Typically about 3 | Check installed package coverage |
| Standard 3-tab asphalt shingles | Typically about 3 | Check installed package coverage |
| Premium / designer shingles | Varies by product | Use package coverage |
| Wood shakes | Varies by product and exposure | Use product coverage tables |
What else goes into one roofing square?
A square measures more than just shingles — it sets the quantity for every layer of the system. For one finished square you typically need:
- Roofing fasteners: calculate from the chosen shingle and its installation instructions, including any enhanced fastening requirements.
- Underlayment: roll sizes and usable coverage vary. Calculate net coverage after the overlaps required by the product instructions.
- Starter and edge flashing are measured along eaves and rakes; ridge and hip caps by their linear lengths. Ventilation is sized from attic area and the vents' net free area, with an appropriate intake/exhaust design.
Why your roof has more squares than your house's footprint
Your roof has more square footage — and more squares — than your home's footprint because of pitch (steepness). The steeper the roof, the more material it takes to cover the same ground area. We apply a pitch multiplier to convert footprint into true roof area:
| Roof Pitch | Multiplier | What It Means |
|---|---|---|
| 4/12 (low slope) | ~1.054x | ~5.4% more roof area |
| 7/12 (common) | ~1.158x | ~15.8% more roof area |
| 12/12 (steep) | ~1.41x | ~41.4% more roof area |
This is why two homes with identical floor plans can need very different amounts of roofing if one has a steeper roof. On top of pitch, we add a waste factor: about 10% for a simple gable roof and 15% or more for complex roofs with hips, valleys, and dormers. Learn more in our pitched roof guide.
How we actually measure and quote a roof in Gwinnett & North Atlanta
Here is how our team turns a roof into a real number. First, we measure the footprint and identify the pitch, then apply the pitch multiplier to get the true roof area. We divide that by 100 to get squares, then add the waste/overage factor because cut shingles and starter courses always create some scrap.
A quick worked example for a typical home in Suwanee, Buford, or Sugar Hill:
- Measured horizontal roof-plan area, including overhangs: 2,000 sq ft. At a uniform 7/12 pitch, 2,000 × 1.1577 = about 2,315.4 sq ft of roof surface.
- 2,315.4 ÷ 100 = about 23.154 squares.
- With an illustrative 10% waste allowance, order for about 2,546.9 sq ft (25.469 squares). If the selected product covers 33.33 sq ft per bundle, 2,546.9 ÷ 33.33 = 76.42, rounded up to 77 whole bundles. Use the actual package coverage and project waste allowance; a product with different coverage needs a different bundle count.
For reference, most single-family homes we re-roof land at ~20–30 squares. We confirm every number on-site (or with aerial measurement) during a Free Roof Inspection, whether you're in Alpharetta, Johns Creek, Cumming, Marietta, or anywhere across Gwinnett County. True to our anti-upsell approach, we only recommend the materials your roof actually needs — never a bigger job than the damage calls for. No mystery, no padding.
How much is a square of roofing in Metro Atlanta?
An installed architectural asphalt shingle roof in Metro Atlanta costs roughly $550 to $900 per square in 2026, including materials, labor, and tear-off — about $5.50 to $9.00 per square foot. Budget 3-tab can run lower (around $380–$600 per square), but most homes in Gwinnett and North Atlanta now use architectural shingles. Shingle material alone is about $110–$170 per square (roughly $40–$70 per bundle) before labor.
| Roofing Type (installed) | Estimated Cost per Square |
|---|---|
| 3-tab asphalt shingles (budget) | ~$380–$600 |
| Architectural asphalt shingles (most common) | ~$550–$900 |
| Standing-seam metal | ~$550–$1,100 |
| Concrete tile | ~$650–$1,150 |
| Cedar shake | ~$700–$1,200 |
Multiply per-square cost by your roof's squares and you get a ballpark total. A full asphalt replacement in the Atlanta area runs about $8,000 to $15,000, and a ~2,000-square-foot home often lands near $12,000. Metro Atlanta tends to run about 15–25% higher than rural Georgia because of labor, permits, and demand. These are estimates only — the honest truth is that the real number depends on your exact roof size, pitch, and complexity. For a deeper breakdown, see our roof replacement cost in North Atlanta guide, or ask about roof financing.
Want your exact square count and price?
Get a free, no-obligation Free Roof Inspection, try our 60-second roof quote tool for a ballpark in under a minute, or call (678) 766-9646.
How many squares is an average house?
An average single-family home roof is about 20 to 30 squares. A small ranch is often 17 to 20 squares, while a large two-story home can reach 28 to 35 squares. The exact count always depends on pitch and roof complexity, which is why a quick measurement beats any rule of thumb. Whether you need a full roof replacement or targeted roof repairs, knowing your square count is the first step.
Frequently Asked Questions
What is a square in roofing?
A square in roofing is a unit of measurement equal to 100 square feet of roof surface, or a 10-foot by 10-foot area. Roofers measure and price materials and labor by the square instead of by the square foot because it keeps the math simple and consistent across the whole industry.
How big is a roofing square?
A roofing square covers 100 square feet of roof surface, which is the same as a 10 ft by 10 ft section. It measures the area of the roof itself, not the floor area or footprint of the house, so a steep roof contains more squares than a flat one over the same footprint.
How many square feet are in a roofing square?
There are exactly 100 square feet in one roofing square. To convert square feet to squares, divide the total roof area in square feet by 100. For example, 2,400 square feet of roof equals 24 squares.
How many bundles are in a roofing square?
Many standard asphalt shingles use roughly three bundles per square. Designer shingles and wood shakes vary by product and exposure. Always use the manufacturer's stated installed coverage to calculate the order.
How much is a square of roofing?
An installed architectural asphalt shingle roof in Metro Atlanta costs roughly $550 to $900 per square in 2026, including materials, labor, and tear-off. Shingle material alone runs about $110 to $170 per square before labor. The only way to know your exact price is a free roof inspection.
How many roofing squares is an average house?
An average single-family home roof is about 20 to 30 squares. A small ranch is often 17 to 20 squares, while a large two-story home can run 28 to 35 squares depending on roof pitch and complexity.
Serving Gwinnett & North Atlanta
Now that you know what a roofing square is, the next step is finding out exactly how many squares your roof has — and what it will really cost. Dom Roofing & Restoration is a GAF Master Elite contractor with offices in Sugar Hill and Suwanee, serving all of Gwinnett County and North Atlanta, including Buford, Alpharetta, Johns Creek, Cumming, Marietta, and Atlanta. We measure every roof honestly and quote it in plain English — no pressure, no guesswork. DOM Roofing & Restoration is also a GAF President’s Club Award Winner.
Schedule your Free Roof Inspection for an exact square count and a transparent, no-obligation estimate — or call us at (678) 766-9646.







